Canopen I/o Module
[one_fourth nr=”first”]
[/one_fourth][one_half] Canopen I/o Module- Version 1
Canopen I/o Module- Version 2
[/one_half][/vc_column_text][vc_column_text][one_half nr=”first”][tab_container position=”top” fade=”yes” style=”style_1″][nav_tabs][tab id=”1″ first=”yes” title=”Description”][/tab][tab id=”2″ title=”Technical Specifications”][/tab][tab id=”3″ title=”Scope of supply”][/tab][tab id=”4″ title=”Resourses”][/tab][/nav_tabs][tab_content_container][tab_content id=”1″ first=”yes”] The ZT-2026 is a wireless ZigBee module that offers 4 differential analog input channels, 2 analog output channels, 2 digital inputchannels and 2 digital output channels and provides a programmable analog input and output range. Each analog input channel can be configured to an individual range and each has 240 Vrms overvoltage protection. There are also options for a power-on value and a safe value. Users can easily configure the module address, protocol, checksum, ZT-PID, ZT-channel and type code settings using a combination of rotary and DIP switches.
- ISM 2.4 GHz Operating Frequency
- Fully Compliant with 2.4G/ZigBee Specifications
- Wireless Transmission Range up to 700 m
- GUI Configuration Software (Windows Version)
- 4 AI, 2 AO, 2 DI and 2 DO Channels
- Individual Channel Configuration
- Overvoltage Protection is up to 240 Vrms
- Surge and ESD Protection
- Configurable Power-on Value Settings
- Configurable Safe Value Settings
- DIN-Rail Mounting
| COMMUNICATION INTERFACE | |
| Wireless Standards | ZigBee 2007 Pro |
| Transmission Power | 11 dBm(FCC Certificated) ( Max 19 dBm) |
| 2.4 GHz Antenna | 5 dBi Omni directional |
| Transmission Range (LoS) | 700 m (Typical) |
| Certification | CE/FCC, FCC ID |
| Max. Slaves in a ZigBee Network 255 | |
| ZB-100R/ZB-100T Support | |
| Protocols | Supports DCON and Modbus RTU Protocols |
| Dual Watchdog | Yes, Module (1.6 Seconds), Communication (Programmable) |
| Hot Swap | Rotary and DIP switch |
| LED Indicators | |
| Power | 1 LED, red |
| ZigBee Communication | 1 LED, green |
| ISOLATION | |
| Intra-module Isolated, Field-to-Logic | 2500 VDC (for AI, AO, DI and DO) |
| EMS PROTECTION | |
| ESD (IEC 61000-4-2) | 4 kV Contact for Power Line, Communication Line and each Channel, 8kV Air for Random Point |
| EFT (IEC 61000-4-4) | 4 kV for Power Line |
| POWER | |
| Input Voltage Range | +10 VDC ~ +30 VDC (Reverse Polarity Protection) |
| Power Consumption | 2.1 W Max. |
| MECHANICAL | |
| Flammability | Fire Retardant Materials (UL94-V0 Level) |
| Dimensions (W x L x H) | 33 mm x 87 mm x 107 mm |
| Installation | DIN-Rail |
| ENVIRONMENT | |
| Operating Temperature | DIN-Rail -25 °C ~ +75 °C |
| Storage Temperature | -30 °C ~ +80 °C |
| Relative Humidity | 10 ~ 90% RH, Non-condensing |
| Analog Input | |
| Input Channels | 4 Differential input types: +/-10 V, +/-5 V, +/-1 V, +/-500 mV, +/-150 mV or -20 mA ~ +20 mA (Requires Optional External 125 Ω Resistor) |
| Resolution | 16-bit |
| Sampling Rate | 10 Samples/Second (Total) |
| Accuracy | +/-0.1% of FSR |
| -3dB Bandwidth | 15.7 Hz |
| Zero Drift | +/-20 μV/°C |
| Span Drift | +/-25 ppm/°C |
| Common Mode Rejectio | 86 dB |
| Normal Mode Rejection | 100 dB |
| Input Impedance | >2 MΩ |
| Overvoltage Protection | 240 Vrms |
| Individual Channel Confi guration | Yes |
| ANALOG OUTPUT | |
| Output Channels | 2 |
| Output Types | +/-10 VDC, +/-5 VDC, 0 ~ 10 VDC or 0 ~ 5 VDC |
| Resolution | 12-bit |
| Accuracy | +/-0.1% of FSR |
| Zero Drift | +/-30 μV/°C |
| Span Drift | +/-25 ppm/°C |
| Programmable Output Slope | 0.0625 ~ 512 V/Second |
| Voltage Capability | 20 mA @ 10 V |
| Power-on Value | Yes |
| Safe Value | Yes |
| DIGITAL INPUT | |
| Input Channels | 2 (Sink) |
| On Voltage Level | 3.5 VDC ~ 50 VDC |
| Off Voltage Level | 1 VDC Max. |
| Input Impedance | 10 KΩ |
| Event Counters | Channels : 2 |
| Max. Count: | 16-bit (65535) |
| Max. Input Frequency: | Yes |
| Safe Value | 50 Hz |
| Min. Pulse Width: | 10 ms |
| DIGITAL OUTPUT | |
| Output Channels | 2 (Sink) |
| Output Types | Isolated Open Collector |
| Max. Load Current | 700 mA/channel |
| Load Voltage | +5 VDC ~ +50 VDC |
| Short Circuit Protection | Yes |
| Power-on Value | Yes |
| Safe Value | Yes |
→ User Manual in PDF format.
[/tab_content][tab_content id=”4″]
vCAN CAN Bus Analyser Product Demo Video
vCAN_Application_Installer
USB_Driver_for_Windows_32bit
USB_Driver_for_Windows_64bit
vCAN_Driver_Installation_Manual
vCAN CAN BUS Analyser User Guide
vCAN_CD_Contents
[/tab_content][/tab_content_container][/tab_container][/one_half][/vc_column_text][/vc_column][/vc_row]
vCAN_Application_Installer
USB_Driver_for_Windows_32bit
USB_Driver_for_Windows_64bit
vCAN_Driver_Installation_Manual
vCAN CAN BUS Analyser User Guide
vCAN_CD_Contents